CD/CG250、CD/CG350系列重载液压缸
本系列缸是由14种缸径,分别按四种速比组成28种规格的单活塞双作用差动油缸。另缸头法兰式、中间耳轴安装式和底座安装式三种还可做成双活塞杆双作用等速油缸,再加上无端部缓冲和两端部有缓冲与上述28 种规格组成384 个品种。特别适合于环境恶劣、重载的工作状态下,广泛应用于钢铁、铸造、锻造及机械制造等工业部门。
The CD series cylinders is a single-piston double-acting differential cylinder of 28 specifications composed of 14 cylinder diameters and four speed ratios respectively. In addition, the three types of cylinder head flange type, intermediate trunnion installation type and base installation type can also be made into double piston rod double acting constant velocity cylinder, plus no end buffer and buffer at both ends, and the above 28 specifications are composed of 384 species. It is especially suitable for harsh environments and heavy-duty working conditions, and is widely used in steel, casting, forging and machinery manufacturing and other industrial sectors.
名称 Name | CD/CG250系列:25, CD/CG350系列:35 CD/CG250 series: 25, CD/CG350 series: 35 |
使用介质 use medium | 矿物油、磷酸酯和水 —乙二醇 Mineral Oil, Phosphate Ester and Water - Glycol |
工作温度 Workingtemperature,°C | -30—100 |
介质粘度 medium viscosity(cst) | 2.8-380 |
运行速度 moving speed (m/s) | 0.5 |
密封 Seal | 动密封:A型采用V型密封圈组,适用于高速高压,T型采用摩擦系数小的滑动环组合密封,使用于低速低压。 静密封:采用国产O型圈 Dynamic seal: Type A adopts V-shaped sealing ring group, which is suitable for high speed and high pressure. Type T adopts sliding ring combination seal with small friction coefficient, which is used for low speed and low pressure. Static seal: using domestic O-ring
|
缸头与缸筒连接形式,排气阀 Connection form of cylinder head and cylinder barrel, exhaust valve | A型,螺纹、法兰连接; B型,缸底焊接结构,缸头螺纹连接,端部均有排气螺塞的单向阀 Type A, threaded, flanged connection; Type B, welded structure at the bottom of the cylinder, threaded connection of the cylinder head, check valve with exhaust plug at the end |
油口连接螺纹 Port connection thread | 所有缸径的油口: GB公制细牙螺纹,也可用英国管螺纹标准 BSP惠氏管螺纹,即我国圆柱管螺纹G Oil ports of all cylinder bores: GB metric fine thread, also available British pipe thread standard BSP, Huishi pipe thread is Chinese cylindrical pipe thread G |
安装形式 Installation form | 缸底衬套耳环、缸底球铰耳环、缸头法兰、缸底法兰、中间耳轴安装、底座安装 Cylinder bottom bushing earrings, cylinder bottom ball hinge earrings, cylinder head flange, cylinder bottom flange, middle trunnion mounting, base mounting |
活塞杆材料 Piston Rod Material | 45# (如需特殊要求订货时说明) 45# (please specify when ordering for special requirements) |